Help with a fitted kit? Photograph every connection, the DIP switches and the problem first.Get support →Find your guideContact usAbout us
Shopping Cart: 0 Products
Menu
Need help with a fitted kit? Before you contact us, photograph every connection, the DIP switches and the problem.Get support →

Mercedes Benz. (2009-2015) NTG 4.5/4.7 Retrofit CarPlay and Android Auto Upgrade Kit

★★★★★5.0· 160+ Google reviewsRead reviews →

£455.00

  • Wireless Apple CarPlay and Android Autoon your car's own screenSound through the car's own Bluetooth, if it has Bluetooth audio
  • Your round controllerworks CarPlay; hold end-call to switch over
  • Plug and play at the head unitnothing cut or joined; about 1.5 to 2 hours
  • A 33-page installation guideevery step photographed, included free

Datasheet: IMI-1000_- Datasheet_Sept_2024 pdf 3.52Mb

IMI-1000 retrofit CarPlay and Android Auto interface

The IMI-1000 from Integrated Automotive UK is a retrofit CarPlay and Android Auto Kit that adds Carplay and Android Auto to the factory fitted Mercedes NTG4.5/4.7 audio system, found in cars made from about 2011 to 2017, depending on the model. The kit gives an “OEM” feel and appearance as it retains the existing Mercedes display on your dash and connects to the rear of the head unit, this kit enables you to control CarPlay/Android Auto with the existing rotary controller and steering wheel controls or touch screen, if fitted.

Compatible with Mercedes Steering Wheel Controls

Retrofit CarPlay and android auto steering wheel integration for Mercedes NTG4.5 NTG4.7

The IMI-1000 provides integration with steering wheel controls such as “Hang Up”, “Pick Up” and Volume adjustment

Integration with Mercedes Control Knob and Buttons

Mercedes controller retrofit CarPlay and Android auto

The IMI-1000 provides full integration with the Mercedes rotary controller and associated buttons, giving you full control of CarPlay and Android Auto

Exceptional display quality utilising on board LVDS graphics processor

NTG4.5 retrofit CarPlay and Android auto graphics CPU
Market Leading Audio Quality

Retrofit CarPlay and Android auto dsp technology
The IMI-1000 features a high quality digital signal processor and DAC(digital to analogue converter) which provides unrivalled audio quality. See below an example RTA plot measured in a vehicle retrofitted with one of our IMI-1000’s

Retrofit CarPlay and Android auto kit audio response

HOW DOES IT WORK?

1. Start ignition

2. IMI-1000 automatically re-pairs with your phone (iPhone or Android phone)

3. CarPlay/Android Auto Automatically starts up on your phone

4. Mercedes COMAND switches to CarPlay/Android Auto automatically and you will be able to control it with your Mercedes controls

5. You can switch between the Mercedes interface and CarPlay by pressing and holding the “end-call” button (the telephone with its handset down) on the steering wheel for about two seconds; the same again switches back

6. Sound: if your car plays music from a phone over its own Bluetooth, the IMI-1000 sends its sound to the car that way. If it cannot, the sound goes into the car’s AUX input: select “AUX” in the car’s audio menu whenever you use the IMI-1000


Watch the Video

Here is a short video showing the IMI-1000 installed into a Mercedes W221 S Class, this is an NTG4.0 system but will give you a good idea of how the NTG4.5/7 system will work.

Mercedes S Class W221 and CL Class W218 2006-2013 Retrofit  CarPlay and Android Auto kit

NTG4.7 W212 E Class Demo Video

IMI-1000 retrofit CarPlay and Android Auto kit for Mercedes W212 E Class

Example Installation Case Study (2014 W212 E Class)

https://integratedautomotive.co.uk/installing-the-imi-1000-retrofit-carplay-and-android-auto-kit-into-your-mercedes-w212-e-class-with-ntg4-7/

Compatibility

Compatible with the following Mercedes-Benz models with COMAND Online or Audio 20 on NTG4.5 or NTG4.7

C-Class W204, S204, C204 (facelift) about 2011 to 2014
GLK X204 (facelift) about 2012 to 2015
E-Class W212, S212, C207, A207 about 2012 to 2016
CLS C218, X218 about 2011 to 2017
ML W166, GL X166 about 2012 to 2015
SLK R172 about 2011 to 2016
SL R231 about 2012 to 2016
A-Class W176, B-Class W246, CLA C117 and GLA X156 about 2012 until their facelifts

Years are typical: the car decides. Near the end of these years, check the system with a VIN check first. Earlier cars (the C-Class W204 and the GLK before their facelifts, and early E-Class W212) have NTG4.0 (COMAND APS), which needs a different kit.

Notes about sound: Bluetooth or AUX

If your car can play music from a phone over its own Bluetooth, the IMI-1000 sends its sound to the car that way. If it cannot, the IMI-1000 plays its sound into the AUX input on the head unit through the 48-pin plug, so “AUX” has to be an input in the car’s audio menu; no AUX lead is needed. On COMAND Online and Audio 20 head units AUX can be switched on in the car’s service menu, as the installation guide shows. Calls use the car’s own microphone, so no separate microphone is needed.

If your car uses AUX: on some Audio 20 head units (found in the A-Class and B-Class) AUX has to be activated with our NTG4.5 Aux activator or a Mercedes Media-AUX lead.

Cameras

This kit is compatible with front parking camera, reverse parking camera and 360 degree cameras.

OUR TECHNOLOGY

Imi-1000 main pcb
The IMI-1000 main PCB is a high speed microcomputer focusing on providing an OEM experience
  • Highest Quality Components
  • Low Noise DAC and Analogue Amplifier Stage
  • Fast boot time
  • High Speed Graphics Driver
  • Integrated CAN Transceiver

Please contact sales@integratedautomotive.co.uk or WhatsApp 07454103323 to confirm your car's compatibility.

  • Same-day despatchOn orders placed by 2 pm (working days), for next-day delivery, usually by DPD.
  • UK delivery £10Europe and worldwide: priced at checkout
  • One-year warrantyA faulty item is replaced free of charge
  • ReturnsUnopened and unused: tell us within 14 days

Delivery, returns and warranty →

Add a reverse camera Optional

The IMI-1000 has its own camera input, and the installation guide covers connecting it.

Complete the installation

Add a reverse camera. The installation guide has a chapter on connecting one to the IMI-1000, so it can be fitted at the same time as the kit.

SKU: NTG 4.5 800-350 Category:

IMI-1000 · kit 800-350

CarPlay and Android Auto, as if they came with the car.

The IMI-1000 adds wireless Apple CarPlay and Android Auto to Mercedes-Benz models with COMAND Online or Audio 20 on NTG4.5 or NTG4.7. It uses the screen already in your dashboard, and you control it with the round controller on the centre console.

The car's own system stays exactly as it is. Press and hold the end-call button on the steering wheel for about two seconds to switch between it and CarPlay or Android Auto. Every connection is a plug at the back of the head unit.

Fits these Mercedes-Benz models

C-ClassW204, S204, C204 (facelift)2011 to 2014
GLKX204 (facelift)2012 to 2015
E-ClassW212, S212, C207, A2072012 to 2016
CLSC218, X2182011 to 2017
ML and GLW166, X1662012 to 2015
SLKR1722011 to 2016
SLR2312012 to 2016
G-ClassW4632012 to 2015
A, B, CLA and GLAW176, W246, C117, X1562012 until their facelifts

Years are typical: the car decides. Near the end of these years, check the system with a VIN check first. The kit fits NTG4.5 and NTG4.7 only: the earlier NTG4.0 (COMAND APS) and NTG5 and later each take a different kit.

In the box

What you get.

  • The IMI-1000 moduleThe IMI-1000 moduleComes with its two Wi-Fi aerials. The DIP switches for your screen are on its edge.
  • Power harnessPower harnessFits between the head unit and the car's 48-pin plug. Its loose leads are for an optional camera.
  • Display leadDisplay leadJoins the module to the head unit's display socket and the car's own display plug.
  • USB leadUSB leadA USB socket for your phone.
  • Installation guideInstallation guide34 pages, every step photographed. Free to download.

You will also need a Torx T20 screwdriver or bit for the head unit's and the glovebox's screws. A plastic trim tool is optional.

Included with every kit

The installation guide. Every step photographed. Every plug numbered.

Most kits arrive with a single sheet of paper. Ours comes with a 34-page guide, written for your car and tested on the bench, that takes you from the first trim clip to the last check.

  • 34Pages
  • 9Sections
  • 1.5–2Hours to fit
  • EasyDifficulty
  1. 01One guide, written for your car

    For Mercedes-Benz models with COMAND Online or Audio 20 on NTG4.5 or NTG4.7, from the C-Class and E-Class to the A-Class and CLA.

  2. 02If you need help, send photos first

    What to photograph as you go, so that we can help quickly if you ever need us.

  3. 03What is in the box

    Every part photographed, with the connection number each plug makes, so you can check the kit before you begin.

  4. 04Taking out the head unit

    One action per step, each with its own photograph: which trim, which screw, and which plug.

  5. 05The wiring diagram

    Five connections, all on the back of the head unit. Every plug is numbered, and nothing is cut or joined.

  6. 06Each connection, one by one

    The 48-pin plug and the fibre-optic plug, each shown in a close-up photograph.

  7. 07Switch on and test

    Test everything before you refit a single panel, while every plug and the DIP switches are still easy to reach.

  8. 08Troubleshooting

    Look up what you see on the screen, and the fix is beside it.

IMI-1000 Installation Guide: Mercedes-Benz NTG4.5 and NTG4.7 · Edition 5, October 2026 · PDF, 17.5 MB

Page 1 of the installation guide: One guide, written for your car
One guide, written for your carFor Mercedes-Benz models with COMAND Online or Audio 20 on NTG4.5 or NTG4.7, from the C-Class and E-Class to the A-Class and CLA.
Page 3 of the installation guide: If you need help, send photos first
If you need help, send photos firstWhat to photograph as you go, so that we can help quickly if you ever need us.
Page 9 of the installation guide: What is in the box
What is in the boxEvery part photographed, with the connection number each plug makes, so you can check the kit before you begin.
Page 14 of the installation guide: Taking out the head unit
Taking out the head unitOne action per step, each with its own photograph: which trim, which screw, and which plug.
Page 16 of the installation guide: The wiring diagram
The wiring diagramFive connections, all on the back of the head unit. Every plug is numbered, and nothing is cut or joined.
Page 19 of the installation guide: Each connection, one by one
Each connection, one by oneThe 48-pin plug and the fibre-optic plug, each shown in a close-up photograph.
Page 24 of the installation guide: Switch on and test
Switch on and testTest everything before you refit a single panel, while every plug and the DIP switches are still easy to reach.
Page 28 of the installation guide: Troubleshooting
TroubleshootingLook up what you see on the screen, and the fix is beside it.

Details

More about this kit.

Questions

Before you order.

Which system does my car need?

NTG4.5 or NTG4.7: COMAND Online or Audio 20, with a 5.8-inch or 7-inch screen that you work with the round controller on the centre console. On COMAND cars the name tells you: NTG4.5 and NTG4.7 are called COMAND Online, and the earlier NTG4.0, COMAND APS, needs a different kit. On Audio 20 cars, go by the model and the year.

How long does it take to fit?

About 1.5 to 2 hours for a first attempt. The installation guide rates it Easy: plug and play. The head unit comes out of the centre console, and all five connections are on its back, at the car's 48-pin plug and its display plug. Nothing is cut or joined. You need a Torx T20 screwdriver.

How does the sound reach my speakers?

If your car can play music from a phone over its own Bluetooth, the sound goes to the car that way. If it cannot, the sound goes into the car's AUX input through the 48-pin plug, so there is no AUX lead; on some cars AUX has to be switched on in the car's service menu first, and the installation guide shows how. Calls use the car's own microphone.

How do I switch between CarPlay and the car's own system?

Press and hold the end-call button on the steering wheel for about two seconds. Press and hold it again to switch back. On some cars it differs: if nothing happens, try pressing and holding BACK, MENU, NAV, SETUP or INFO for two seconds.

Will my controller and buttons still work?

Yes. With CarPlay or Android Auto on screen, the round controller and the back button on the console work it, and the volume buttons set the volume.

Can I add a reverse camera?

Yes. The installation guide has an optional chapter on fitting a reverse camera to the IMI-1000.

Can I read the installation guide before I buy?

Yes. The full 33-page guide is free to read and download, so you can see exactly what fitting involves before you order.

Description

The IMI-1000 is a retrofit CarPlay and Android Auto upgrade kit which adds wireless connectivity to Mercedes Vehicles equipped with a central display.

Compatibility;

About 2011 to 2017, depending on the model: 5.8″ Display Screen

About 2011 to 2017, depending on the model: 7.0″ Display Screen

The IMI-1000 works by communicating with your existing entertainment system as well as your in-car entertainment system (Including the OEM Steering wheel controls, rotary controls, touchscreen(if fitted), vehicle speaker system and the Central Information Display). It operates in either by-pass mode or in “active mode”. In by-pass mode the IMI-1000 does not affect the normal operation of the in-car entertainment system, the standard Mercedes COMAND NTG4.5 and NTG4.7 user interfaces as well as the standard COMAND navigation system(if fitted) will be shown on the CID when in by-pass mode. Active mode is initiated when you connect your mobile phone to the car via the wireless Bluetooth connection or USB cable. After connection, the IMI-1000 activates CarPlay or Android Auto (dependent upon the operating system of your phone, iOS or Android). The Central Information Display (CID) will then show the CarPlay or Android Auto user interface and unleash the power of CarPlay/Android Auto!

Additional information

Weight 4 kg
Dimensions 15 × 10 × 10 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Check it fits your model

Each model’s page shows whether the kit fits your car and the kit in action. Its Buy button brings you straight back to Add to basket, with your model chosen.

Search every model we cover →