AUDI MIB1/MIB2 MMI Retrofit CarPlay and Android Auto Kit
The IMI-1000 from Integrated Automotive UK is a retrofit CarPlay and Android Auto Kit that adds Carplay and Android Auto connectivity to a standard vehicle. The kit gives an “OEM” feel and appearance as it is controlled the existing MMI display on your dash as well as the MMI rotary controller and steering wheel controls
This model is compatible with the following vehicles equipped with the Audi MIB1 MMI;
AUDI A3(8V) 2017-2018 (MSTD 5.8in display and MHIG 7.0in display software)
AUDI A4 2016-2018 (MST2 and MIB1/MIB2 systems)
AUDI A5 2016-2018 (MST2 and MIB1/MIB2 systems)
AUDI A6 2016-2018
AUDI A7 2016-2018
AUDI Q5L 2018 onwards
AUDI Q7 2016-2018
Do I have MMI 3G BASIC, MMI 3G HIGH or MMI 3G+?
To determine if your vehicle is equipped with MMI 3G, please visit this page and follow the instructions.
IMPORTANT: If you do not have an AUX port or do not have AUX in your media menu, you have two options:
1. Use an AUX-AMI cable and connect our wiring loom 3.5mm jack to the cable.
2. Enable AUX via VCDS or similar during installation. Enabling aux will enable our kit to connect directly to the AUX pin on the rear of the head unit, allowing for a completely hidden installation and no need for an AMI-AUX cable.
All IMI-1000’s are compatible with front parking camera, reverse parking camera and 360 degree cameras.
The IMI-1000 is a retrofit kit that adds CarPlay and Android Auto connectivity to AUDI’s equipped with the MMI MIB1 and MIB2 entertainment system. The IMI-1000 works by communicating with your existing MMI system as well as your in-car entertainment system (Including the OEM Steering wheel controls, MMI rotary controls and associated buttons, vehicle speaker system and the Central Information Display). It operates in either by-pass mode or in “active mode”. In by-pass mode the IMI-1000 does not affect the normal operation of the in-car entertainment system, the standard AUDI MMI MIB user interface and the standard AUDI navigation system(if fitted) will be shown on the CID when in by-pass mode. Active mode is initiated when you connect your mobile phone to the car via the wireless Bluetooth connection or USB cable. After connection, the IMI-1000 activates CarPlay or Android Auto (dependent upon the operating system of your phone, iOS or Android). The Central Information Display (CID) will then show the CarPlay or Android Auto user interface and unleash the power of CarPlay/Android Auto!
*Note – There are various variants of the IMI-1000 MIB system and we will contact you after purchase to confirm which kit you need for your specific vehicle.
15 × 10 × 3 cm
Only logged in customers who have purchased this product may leave a review.