AUDI A4 2016-2018 (B9) Retrofit CarPlay and Android Auto Kit
The IMI-1000 from Integrated Automotive UK is a retrofit CarPlay and Android Auto Kit that adds Carplay and Android Auto functionality to a standard vehicle. The kit gives an “OEM” feel and appearance as it retians the existing MMI display on your dash as well as the MMI controls (rotary contoller and steering wheel contols)
Control CarPlay/Android Auto with your MMI Controls
Control volume, navigate menus, activate Siri and much more using your existing Audi MMI controls.
- Easy to install (plug and play into back of head unit)
- Uses Audi rotary controller and steering wheel controls
- Fully integrated into existing audio system
- Wireless connection (CarPlay only)
- CarPlay and Android Auto compatible
- 1 Year UK Warranty
- UK Support and Repair
- Allows you to Make calls, use Navigation Apps, Spotify, iTunes, Radio Apps and much more
- Attractive user interface
- 7.0in Display (800 x 480 pixels)
- 8.8in Display (800 x 480 pixels)
This model is compatible with a number of Audi models including;
- AUDI A3(8V) 2013-2018
- AUDI A4(B9) 2016-2018
- AUDI A5 2017-2018
- AUDI Q5L 2018 onwards
- AUDI Q7 2016-2018
- Highest Quality Components
- Low Noise DAC and Analogue Amplifier Stage
- Fast boot time
- High Speed Graphics Driver
- Integrated CAN Transceiver
Basic Retrofit CarPlay/Android Auto installation steps;
- Remove Head unit
- Disconnect 48PIN connector from head unit
- Connect IMI-1000 48PIN connector to head unit
- Connect Audi 48PIN connector to IMI-1000 wiring loom 48PIN connector
- Disconnect Display connector and connect to IMI-1000 LVDS IN connector
- Connect IMI-1000 LVDS OUT connector to display
Not sure if you have MMI MIB1?
To determine if your vehicle is equipped with MMI MIB1, please visit this page and follow the instructions.
IMI-1000 Audio Connection to Car
IMPORTANT: If you do not have an AUX port you have two options:
1. Use an AUX-AMI cable and connect our wiring loom 3.5mm jack to the cable.
2. Enable AUX via VCDS or similar during installation. Enabling aux will enable our kit to connect directly to the AUX pin on the rear of the head unit, allowing for a completely hidden installation and no need for an AMI-AUX cable.
All IMI-1000’s are compatible with front parking camera, reverse parking camera and 360 degree cameras.