Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!

Menu

IMI-1000 Installation Guide – PCM3.1

Here is the installation guide for the PCM3.1 install.

IMI-1000 PCM3.1 Installation Guide pdf [1Mb]

Echo cancellation is NOT required for your vehicle

Removing the PCM3.1 : Here is a great video showing how to remove the PCM3.1, the IMI-1000 can be placed behind the head unit

Please see attached the user installation manual and setup manual for your IMI-1000.

You can follow this guide showing how to install the IMI-1000 into the head unit

How to install CarPlay on Porsche PCM3.1 (youtube.com)

You will receive our brand new “GEN5” IMI-1000 which has an updated user interface and no longer requires fitment of an additional microphone (it will use the original Audi Microphone).

If the vehicle does not have OEM Bluetooth audio, follow v1.2 manual attached.

If the vehicle has OEM Bluetooth audio (music streaming, not just calls) then you can follow either v1.2 or v1.4 (see QR code on Module).

Below are some tips for the installation;

1. If you are using AUX, activate it before you begin (unless you are going to use Bluetooth) and then ensure after activation you still have sound from your usual sources like radio etc.

2. Install the interface (don’t forget to transfer the MOST Fibre optic connector from the original Porsche quadlock to the new quadlock, if you car has one)

3. Select Aux (or Bluetooth if using Bluetooth audio) in your Audio menu

4. Switch to our interface by pressing and holding the BACK button for 2 seconds

5. Your car should NOT Require echo cancellation

If you get stuck, send detailed pictures of every connection you have made to me and we will assist.