Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!


IMI-1000 Installation Guide – JLR HARMAN

Here is an overview of what all of the Dip switches do and how they affect the system;

Further guidance for dip switch settings is found on the module itself.

Please see below a link to the installation guide;

Jaguar/Land Rover/Range Rover Retrofit CarPlay and Android Auto Installation Guide (HARMAN SYSTEMS) | Integrated automotive UK

Please see below a nice video showing you how to remove the head unit – you will need access to the back of the head unit in order to plug in the harness.

(245) How to change / remove Range Rover Evoque CD / DVD player / Navigation computer – YouTube

Here are some tips (from experience)

Please note the unit we have shipped is our new GEN5 version which no longer needs the microphone.

This version of the IMI-1000 can utilise AUX or Bluetooth audio for audio transfer (you can only use Bluetooth audio transfer if you have JLR Bluetooth audio).

If you wish to use Bluetooth audio for audio transfer, follow setup manual v1.4

If you wish to use aux audio for audio transfer, follow setup manual v1.2

In both cases, the connection to the phone can be wired or wireless.

Some tips for the install;

1. Check the dip switches are set correctly for your display size, there is a label on the top of the unit showing the various settings and the switches are on the side of the unit

2. The display connection is at the head unit end of the display cable, you do NOT disconnect the display end of the cable.

3. Don’t forget to transfer the fibre optic (MOST) cable to the new quadlock from the original quadlock if you have one

4. Connect the Antennas to the SMA connectors on the IMI-1000

5. Switch to our interface by pressing MODE for 2 seconds on the steering wheel

If you get stuck, please send detailed pictures of the install to us, showing all connections you have made and we will assist.