Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!


IMI-1000 Installation Guide – GEN6 Mercedes NTG6

Here is the connection guide for NTG6.0 systems

IMI-1000 NTG6.0 Connection guide pdf [6.1Mb)

The NTG5.x Manual is also useful : NTG5.x Installation Guide

Note that the above connection guide shows connection of a USB-AUX interface, but as of May 2024 this is no longer required and you can utilise Bluetooth Audio for audio transfer to the vehicle as per IMI-1000 Setup Guide v1.4

Here are some tips (from experience)

1. check the dip switches are set correctly for your display size and car type, the settings are indicated on the label on top of the module. The switches themselves are no the side of the module.

2. Do not forget to transfer the Fibre optic line from the original mercedes quadlock to the new quadlock that will now be connected to the back of the head unit. Also installed the antennas to the SMA connectors on the IMI-1000.

3. Switch to our interface by pressing HANG UP on the steering wheel for 2 seconds

4. Un-pair and delete the bluetooth connection to mercedes from your phone (if you have an iphone)

5. If needed, the factory mode passcode is 8818.

If you get stuck, send detailed pictures to us of every connection and we will assist.