Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!

Menu

IMI-1000 Installation Guide – Bentley RNS810

The IMI-1000 unit has our new “BT” version of the software which allows you to remain connected to the OEM Bluetooth system and use Bluetooth audio streaming for the audio connection rather than aux. If you wish to use Bluetooth audio, remain connected to Bentley Bluetooth and follow Setup Guide v1.4. If you wish to use AUX, follow Setup Guide v1.2. These can be found in the other QR code link on the module itself.

Installation is a simple process, follow guidance below;

  1. It is recommended to remove battery earth (not +12v)

Follow this installation guide

Bentley RNS810 Retrofit CarPlay and Android Auto Guide | Integrated automotive UK

  1. Connect battery earth and turn on ignition, select AUX input on the VW media menu press and hold SETUP on the console and the unit will switch to the IMI-1000 interface.
  2. If using OEM Bluetooth as the audio stream, remain paired to OEM bluetooth
  3. If using aux, ensure you Un-Pair from Bentley Bluetooth and DELETE the Bluetooth pairing to Bentley completely. Then pair to IMI-1000 bluetooth (don’t try to pair to wifi) – CarPlay/AA will boot.

If you get stuck, please send photos of your progress (every connection) to me and we will assist.