Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!

Menu

IMI-1000 Installation Guide – AUDI/SKODA/VW/PORSCHE MIB/MSTD/MHIG

Below is a link to the manuals for the IMI-1000 MIB1/MIB2/MSTD/MHIG/MST2 systems.

AUDI_PORSCHE_MIB1_IMI-1000 Installation Manual pdf [836kb]

You will receive our brand new “GEN5” IMI-1000 which has an updated user interface and no longer requires fitment of an additional microphone (it will use the original Audi Microphone).

If the vehicle does not have OEM Bluetooth audio, follow v1.2 manual attached.

If the vehicle has OEM Bluetooth audio (music streaming, not just calls) then you can follow either v1.2 or v1.4 attached.

Below are some tips for the installation;

1. Make sure the dip switches match your vehicle/display, they are the switches on the side of the unit – the switch positions are indicated on the label on top of the module.

2. Activate AUX before you begin and then ensure after activation you still have sound from your usual sources like radio etc.

3. Install the interface (don’t forget to transfer the MOST Fibre optic connector from the original audi quadlock to the new quadlock, if you car has one)

4. Select Aux in your Audio menu

5. Switch to our interface by pressing and holding MENU for 2 seconds

6. Your car should NOT Require echo cancellation

If you get stuck, send detailed pictures of every connection you have made to me and we will assist.