Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!

Menu

IMI-1000 Installation Guide – Audi 3G Systems

Below is a link to the Audi 3G manuals which apply to all 3G systems including the A8.

Your kit is our new version which has recently been released. The connections are the same except you no longer need to install the microphone as the IMI-1000 now uses the OEM mic.

The factory passcode is now 8818 (not 688612).

If the vehicle does not have OEM Bluetooth audio, follow Setup Guide v1.2.

If the vehicle has OEM Bluetooth audio (music streaming, not just calls) then you can follow either v1.2 or v1.4 (See QR code on IMI-1000 for setup guide)

Below are some tips for the installation;

1. Make sure the dip switches match your vehicle/display, they are the switches on the side of the unit – the switch positions are indicated on the label on top of the module.

2. If you plan to use aux, activate AUX before you begin (unless you are going to use Bluetooth) and then ensure after activation you still have sound from your usual sources like radio etc.

3. Install the interface (don’t forget to transfer the MOST Fibre optic connector from the original audi quadlock to the new quadlock, if you car has one)

4. Select Aux (or Bluetooth if using Bluetooth audio) in your Audio menu

5. Switch to our interface by pressing and holding MENU/INFO for 2 seconds

6. Your car should NOT Require echo cancellation

How to choose the right dip switch setting?

1. Determine if the control panel has “INFO” or “MENU” on the centre console. This will narrow the selections down, for example if you have MENU on the console, you will need to look at the dip switches on the left label below (always check your labels and don’t use the settings below if they do not match your labels!)

2. Now you need to select the right model, for example if you have an A4 with INFO, the only possible combinations are HLHHH or HLHHL

3. You may need to try both settings

If you get stuck, please send detailed photos of all of your connections that you have made to us and we will assist you – its important to send photos of every connection as well as your dip switch selection.