Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!


IMI-1000 Installation Guide – A1/Q3 RMC

Please see below a link to the user installation manual and setup manual for your IMI-1000.

IMI-1000 A1_Q3 Installation Guide pdf [1Mb]

You will receive our brand new “GEN5” IMI-1000 which has an updated user interface and no longer requires fitment of an additional microphone (it will use the original Audi Microphone).

If the vehicle does not have OEM Bluetooth audio, follow v1.2 manual (see QR sticker).

If the vehicle has OEM Bluetooth audio (music streaming, not just calls) then you can follow either v1.4 (see QR sticker).

Below are some tips for the installation;

1. Make sure the dip switches match your vehicle/display, they are the switches on the side of the unit – the switch positions are indicated on the label on top of the module.

2. Activate AUX before you begin (unless you are going to use Bluetooth) and then ensure after activation you still have sound from your usual sources like radio etc.

3. Install the interface (don’t forget to transfer the MOST Fibre optic connector from the original audi quadlock to the new quadlock, if you car has one)

4. Select Aux (or Bluetooth if using Bluetooth audio) in your Audio menu

5. Switch to our interface by pressing and holding MENU for 2 seconds

6. Your car should NOT Require echo cancellation

7. The gateway connector is located above the throttle,  you will need to get your head into the drivers footwell and look toward the sky, you will eventually find it!

If you get stuck, send detailed pictures of every connection you have made to me and I will assist.