Shopping Cart: 0 Products
COVID 19 update July 2022 - Business as usual!


IMI-1000 Install Guide – NTG4.0

Please see below links to the manuals for the NTG4.0 kit.

NTG4.0 Installation Guide pdf [1.2Mb)

The harnesses are labelled, but just to be sure:

Connect the following connector to the head unit display socket:

Connect the following connector to the original mercedes display connector that you removed from the head unit display socket;

Connect this connector below to the IMI-1000 LVDS port;

Just a couple of tips;

1. Don’t forget to transfer the fibre optic cable to the new quadlock

2. If you get a black screen for the COMAND dispaly but carplay works ok, it is usually because the display connector you have connected to the head unit is 180deg out of phase, so simply remove, rotate it 180deg and refit it.

3. If you get a black screen in Carplay its usually because the dip switches are set incorrectly.

4. You should not require echo cancellation.

5. The factory mode passcode is 8818