Help with a fitted kit? Photograph every connection, the DIP switches and the problem first.Get support →Find your guideContact usAbout us
Shopping Cart: 0 Products
Menu
Need help with a fitted kit? Before you contact us, photograph every connection, the DIP switches and the problem.Get support →

IMI-1000 Installation Guide – Alfa Romeo Giulietta Uconnect

Fitting the IMI-1000 to an Alfa Romeo Giulietta with the Uconnect touch screen (kit 800‑335) uses two guides: the installation guide for the fitting itself, and the IMI-1000 Setup Manual for setting it up afterwards. The installation guide replaces the earlier notes and pictures on this page.

Cover of the IMI-1000 Installation Guide for the Alfa Romeo Giulietta with the Uconnect touch screen

Installation guide · for the fitting

IMI-1000 Installation Guide: Alfa Romeo Giulietta Uconnect

Kit 800‑335 · Giulietta (940) with the Uconnect touch screen · Edition 2, October 2026 · PDF, 35 pages, 14.7 MB

Every step of the fitting: making the car safe, taking out and opening the head unit, fitting the kit’s flat cable inside it, the connections at the back of the head unit, plugging in the module, and a switch-on test before anything is refitted. Difficulty: intermediate, because the head unit is opened and ribbon cables are fitted. Time: about 1.5 to 2 hours.

Open the installation guide Download

The guide opens in a new tab. It can be read on a phone while working in the car.

Cover of the IMI-1000 Setup Manual

After the fitting · setting up

IMI-1000 Setup Manual

Choose one sound method: AUX in the car’s media menu (Section B, the AUX method) or the car’s own Bluetooth (Section A, the Bluetooth method). The manual also covers connecting your phone, reverse camera settings and troubleshooting.

Setup guides page Open the manual

Start here

How to use these guides

  1. 1

    Check that this is the right kit for your Giulietta

    This kit is for the Giulietta (940) with the Uconnect colour touch screen in the centre of the dashboard and no Apple CarPlay in its menus. A Giulietta with a button radio and a small display has no screen to show CarPlay on, and the Giulia and Stelvio have a different kit.

    Installation guide, page 4: Is this the right guide and kit?

  2. 2

    Fit and connect the IMI-1000

    The screen and the head unit come out of the dashboard together and are opened on the bench. Connections 1 to 4 are inside the head unit, where the kit’s flat cable goes between the car’s ribbons and the head unit’s own board; 5 to 8 are at the back of the head unit. Test before you refit anything.

    Wiring diagram, page 15 · Connections 1 to 3, page 21 · Switch on and test, page 25

  3. 3

    Set it up

    Once the car is back together, the IMI-1000 Setup Manual takes over: Section B for AUX, or Section A for the car’s own Bluetooth.

    IMI-1000 Setup Guides page

Which cars

Is this the right guide and kit?

This kit fits the Alfa Romeo Giulietta with the Uconnect touch screen. The system in the car is what matters. Check your car before you take anything apart.

CarWhich carsKit
Alfa Romeo Giulietta (940)With the Uconnect colour touch screen in the centre of the dashboard, without Apple CarPlay in its own menusThis kit (800‑335).
Giulietta with a button radioA radio with buttons and a small display onlyNot this kit: there is no screen to show CarPlay on.
Giulietta with Apple CarPlayApple CarPlay already in the car’s own menusNot needed.
Alfa Romeo Giulia and StelvioA wide screen and a rotary controllerNot this kit: a different kit and guide.

What is fitted where: the kit’s flat cable goes inside the head unit, and the power harness and display lead connect at its back. The IMI-1000 module, with its aerial, goes behind the dashboard near the head unit. The USB lead gives you a USB socket for your phone. There are no wires to cut or join.

Common questions

Quick answers

If you need help, send photos first

We can only help when we can see what has been done: photographs of every connection you have made, your DIP switches, and the problem itself. Page 3 of the guide shows what to photograph.

Get support for this kit

Switching to the IMI-1000

Press and hold the hang-up button (the red telephone) on the steering wheel. Holding the answer-call, menu, back or next-track button also works. The same again brings the car’s own screen back.

Sound and next steps, section 09

Sound: AUX or Bluetooth

Choose AUX in the car’s media menu, or the car’s own Bluetooth if it plays music. The sound reaches the car through the kit’s main plug: there is no separate AUX lead.

Sound, microphone and controls

DIP switches

Set the switches as the module’s label: L H H H H H. Switches 1 and 2 at L H use the car’s own microphone on this module.

Set the DIP switches

Ribbon cables

The flat cable inside the head unit is the part that needs care. The guide shows how to fit a ribbon so it works, and the signs of one that is not seated.

Ribbon cables, section 03

Something not right?

The troubleshooting table lists what you see and what to check, in the order it happens: a black screen, no switch-over, no sound.

Troubleshooting, section 10

Adding a reverse camera

Optional. The last section of the guide shows how to connect a reverse camera to the IMI-1000, the settings it needs, and what to do if the picture does not switch.

Adding a reverse camera, section 11

The settings passcode

If the IMI-1000 asks for the settings passcode during setup, it is 8818.

Sound and next steps, section 09

Help with a fitted kit

Our support page shows the pages of this guide to check first, and sends us your photos with your request. Without the photos we cannot help.

IMI-1000

The kit for this guide